Epoxy mastic is based on epoxy resin and amino hardener. Epoxy gel can be used in various industries such as stone cutting, stone restoration and care, especially marble stone, stone restoration, constructions, etc. This mastic has excellent polishing ability, it does not swell over time, it has high adhesion on the surface and chemical resistance, it is resistant to atmospheric conditions and moisture, and it has a small and safe smell for users.
Epoxy mastic (epoxy gel)
440,000 تومان
For longer durability, mastic is better, the lid of the buckets is completely closed, away from direct sunlight and kept at a temperature below 20 degrees Celsius .
Superior quality
Guaranteed quality of products
Variety of products
Variety and product updates
Fast support
Call during office hours
Research and development
The latest in the world
Categories: Manufactured Products, mastic
Description
Additional information
Weight | 10 kg |
---|
Reviews (0)
Be the first to review “Epoxy mastic (epoxy gel)” Cancel reply
Related products
Epoxy resin 139 and epoxy hardener 502
320,000 تومان
This product is used to repair the back of the stone and modify (epoxy) the surface of the stone and for short stone processing lines, when speed is important. Due to its lower curing speed than REP-140, this product is used in Warm seasons are recommended. Also, this product has acceptable stability against ultraviolet rays and has a high purchase value.
210 epoxy resin and 510 epoxy hardener
350,000 تومان
Semi-transparent mastic 103
Type 3 semi-transparent mastic is a two-component mastic based on unsaturated polyester resin, which is designed and produced to fill the voids and improve the surface and bonding of marble stones, and it has the same tonality as marble stones, and Sometimes it is also used for sculpting and some decorative activities.
Temperature: 28 c
Percentage of curing agent: 1 volume unit (30 mL) of 1mm film
User opportunity 11 14 minutes
Gel time 12 16 minutes
Hardening time 31 38 minutes
Epoxy resin 270 and epoxy hardener 310
Mastic Type 3
815,000 تومان
Type 3 mastic is a two-component mastic based on unsaturated polyester resin, which is designed and produced in order to fill the pores and correct the surface and lacing of building stones but sometimes it is used for sculpture and some decorative activities.
These mastics are offered in 3 degrees of viscosity (low-LV viscosity), medium (MV) and high (HV) and with dry speed, A0, A1 and A2 .
Epoxy Mastic
440,000 تومان
These mastics are in the basic state for travertine stones, but they are produced in the special group of marble (HA) and marble (semi-transparent codes). This product has the lowest environmental yellowing and the highest color stability using UV-resistant pigments. (The weight of the mastic bucket is 7 kg
Economic mastic
700,000 تومان
Colored resin mastics have high flammability, so they must be kept away from direct flame and high heat .
Uses :
This product is designed and produced in order to reduce consumer cost based on the optimal price point – quality. This product has the lowest environmental yellowing and the highest color stability using UV resistant pigments
Reviews
There are no reviews yet.