These mastics are in the basic state for marble stones, but they are produced in special groups for marble (HA) and marble (semi-transparent codes). This product has the lowest environmental yellowing and the highest color stability using UV-resistant pigments .
Semi-transparent Mastic 102
1,420,000 تومان
For longer durability, mastic is better, the lid of the buckets is completely closed, away from direct sunlight and kept at a temperature below 20 degrees Celsius .
Superior quality
Guaranteed quality of products
Variety of products
Variety and product updates
Fast support
Call during office hours
Research and development
The latest in the world
Description
Additional information
| Weight | 10 kg |
|---|
Reviews (0)
Related products
Epoxy resin 139 and epoxy hardener 502
This product is used to repair the back of the stone and modify (epoxy) the surface of the stone and for short stone processing lines, when speed is important. Due to its lower curing speed than REP-140, this product is used in Warm seasons are recommended. Also, this product has acceptable stability against ultraviolet rays and has a high purchase value.
Epoxy resin 140 and epoxy hardener 410
This product is recommended for repairing the back of the stone and modifying (epoxidizing) the surface of the stone and for short lines of stone processing due to the high curing speed in the cold seasons of the year. Also, this product has an acceptable resistance to ultraviolet rays and has a high purchase value.
semi-transparent mastic 104
Type 3 semi-transparent mastic is a two-component mastic based on unsaturated polyester resin, which is designed and produced to fill the voids and improve the surface and bonding of marble stones, and it has the same tonality as marble stones, and Sometimes it is also used for sculpting and some decorative activities.
Temperature: 28 c
Percentage of curing agent: 1 volume unit (30 mL) of 1mm film
User opportunity 11 14 minutes
Gel time 12 16 minutes
Hardening time 31 38 minutes
Mastic Type 3
Type 3 mastic is a two-component mastic based on unsaturated polyester resin, which is designed and produced in order to fill the pores and correct the surface and lacing of building stones but sometimes it is used for sculpture and some decorative activities.
These mastics are offered in 3 degrees of viscosity (low-LV viscosity), medium (MV) and high (HV) and with dry speed, A0, A1 and A2 .
Reviews
There are no reviews yet.