Non-amino unsaturated polyester resin R300
Planting glue 301 (epoxy-mortar)
Two-component resin colored implant adhesive, which is based on epoxy. This product is used to plant rebars and encarbolts inside concrete . Another feature of this product is that it can be used in all seasons according to different temperature ranges. Resin color implant adhesive can be used for rebar joints after installation with a diameter of 8 to 40 mm. Even under seismic load and with a useful life of 100 years .
Semi-transparent Mastic 101
Semi-transparent type 3 mastic is a two-component mastic based on unsaturated polyester resin, which is designed to fill the pores and correct the surface and lacing of marble stones and has been produced and is the tonality of marble stones, and sometimes it is used for sculpture and some decorative activities.
Semi-transparent Mastic 102
Semi-transparent mastic 103
Type 3 semi-transparent mastic is a two-component mastic based on unsaturated polyester resin, which is designed and produced to fill the voids and improve the surface and bonding of marble stones, and it has the same tonality as marble stones, and Sometimes it is also used for sculpting and some decorative activities.
Temperature: 28 c
Percentage of curing agent: 1 volume unit (30 mL) of 1mm film
User opportunity 11 14 minutes
Gel time 12 16 minutes
Hardening time 31 38 minutes
semi-transparent mastic 104
Type 3 semi-transparent mastic is a two-component mastic based on unsaturated polyester resin, which is designed and produced to fill the voids and improve the surface and bonding of marble stones, and it has the same tonality as marble stones, and Sometimes it is also used for sculpting and some decorative activities.
Temperature: 28 c
Percentage of curing agent: 1 volume unit (30 mL) of 1mm film
User opportunity 11 14 minutes
Gel time 12 16 minutes
Hardening time 31 38 minutes
Styrene monomer
It is a combustible liquid and its steam processes an explosive dirham with air. Near its ignition, it is 1.1 and 1.6% by volume of styrene vapor in the air, and its emitting point is 32 degrees Celsius. Considering that its steam is heavier than air, this gas can travel a long distance to reach a source of embers and cause embers to return. To turn it off, water can be used as spray, CO2, chemical powder or foam. It should be seen that explosive organic peroxides can be formed during fire. Guard glasses and masks should be used during extinguishing operations.
Type 1 coope mastic
Rangin resin mastics have high flammability, so they must be kept away from direct flame and high heat .
Uses :
This product is designed and produced in order to reduce consumer cost based on the optimal price point – quality. This product has the lowest environmental yellowing and the highest color stability using UV resistant pigments
